Brief analysis on the operation of aluminum sheet,

A brief analysis of the operation of the aluminum plate, strip and foil industry in November 2017

according to my nonferrous research data on the priorities of decision makers and the axis of corporate culture of 40 aluminum plate, strip and foil enterprises across the country, the output of China's aluminum plate, strip and foil enterprises in November 2017 was 513500 tons, a decrease of 6.91% over October and an increase of 1.83% over the same period last year. A total of 5.325 million tons were produced in June, an increase of 5.43% over the same period last year, which was an increase in the expansion of the steel structure market. In November, the operating rate of aluminum plate, strip and foil enterprises was 71.05%, down 1.35 percentage points month on month. Among them, the 40 sample enterprises have a total capacity of 8.722 million tons, accounting for 71.55% of the total national capacity

in November, the operating rate of aluminum plate, strip and foil enterprises was 71.05%, down 1.35 percentage points month on month. In terms of enterprise size, the operating rate of large enterprises in November was 74.9%, down 0.2 percentage points month on month; The operating rate of medium-sized enterprises in November was 44.5%, down 1.2 percentage points month on month; The operating rate of small enterprises in November was 42.4%, down 2.7 percentage points month on month

in November 2017, the output and operating rate of aluminum plate, strip and foil enterprises declined slightly, mainly because November was the off-season of the traditional aluminum industry, and the weakening of terminal consumption led to the decline of enterprise orders, and the intensive expansion of lithium battery enterprises was obvious; At the same time, environmental protection inspection was carried out in Henan. When the floor foil enterprises were forced to limit production, the operating rate of enterprises fell. From the perspective of the main end consumer market, various indicators of real estate have continued to slow down, the preferential policy of automobile purchase tax is about to be cancelled, and the growth rate is limited by the excessive base of the home appliance market. It is expected that the output and operating rate of aluminum plate, strip and foil enterprises will decline significantly in December 2017 due to the environmental protection review, in addition to the high damping characteristics, the reduction of vibration and noise, and the impact of the shortage of natural gas supply, as well as the weakening of end consumption due to seasonal factors